Products

Products

+
  • 软式透水管.jpg

Soft permeable pipe


Soft permeable pipe is a new type of pipe with reverse filtration (drainage) water function, which overcomes many disadvantages of other drainage pipes. Because of its unique design principle and excellent performance of constituent materials, it has strong drainage and water seepage effect. It uses "capillary" phenomenon and "siphon" principle to collect water absorption, water permeability and drainage in one go, it has the pressure resistance, water permeability and filtration function to meet the requirements of engineering design.

key word:

Soft permeable pipe

Description

Product Details


Product Introduction

Soft permeable pipe is a new type of pipe with reverse filtration (drainage) water function, which overcomes many disadvantages of other drainage pipes. Because of its unique design principle and excellent performance of constituent materials, it has strong drainage and water seepage effect. It uses "capillary" phenomenon and "siphon" principle to collect water absorption, water permeability and drainage in one go, it has the pressure resistance, water permeability and filtration function to meet the requirements of engineering design. It is not broken due to geological and geographical temperature changes, and can achieve the effect of discharging clean water, and will not cause secondary pollution to the environment. It is a new type of environmentally friendly product. Because of its simple construction, no joint, no special requirements for geology and topography, any place that needs dark drainage can be used at will.

⑴ High carbon steel wire: phosphoric acid anti-rust treatment, coated with PVC to prevent acid and alkali corrosion, unique steel wire spiral skeleton to ensure that the surface of the pipe wall is smooth and under pressure.

(2) Non-woven filter layer: to ensure effective filtration and prevent sediment from entering the pipe.

(3) Synthetic polyester fiber: the warp yarn is high strength Teduolong yarn or nylon yarn coated with PVC, and the weft yarn is made of special fiber to form sufficient tensile strength. The soft permeable pipe has: 1) small pore diameter, all-round water permeability, and good permeability; 2) high compressive and tensile strength, long service life; 3) good corrosion resistance and anti-microbial erosion; 4) good overall continuity, Few joints, convenient connection; 5) light weight, convenient construction; 6) soft texture, good bonding with soil, etc.

The permeable pipe is supported by an anti-rust spring ring to form a high-pressure soft structure. The non-woven fabric is lined and filtered to prevent mud and sand impurities from entering the pipe, thus achieving the function of net water seepage. The outer winding of polyester yarn has excellent water absorption and can quickly collect excess water in the soil. The rubber ribs make the pipe wall coating and the spring steel ring pipe body become an organic whole, which has a good all-round water permeability function. The penetrating water penetrates into the pipe smoothly, while the mud and sand impurities are blocked outside the pipe, so as to achieve the purpose of water penetration, filtration and drainage in one go.

 

Scope of application

◎ Vertical and horizontal drainage on the north side of various retaining walls;

◎ Drainage of highway, railway subgrade, shoulder and soft soil foundation;

◎ Drainage of tunnels and underpasses;

◎ Drainage of power ash dam and water conservancy dam body;

◎Drainage and vegetation protection of central isolation zone of expressway;

◎ Drainage of outdoor sports venues;

◎ Horizontal drilling and drainage;

◎ Slope protection by drainage in slippery ground;

◎ Roof garden and flower table drainage;

◎ Keep on hillside water

◎ Underground drainage of soil preparation works;

 

Connection mode

The construction is based on the principle of reliability and convenience. The 50mm permeable pipe can be produced according to the circumferential length of the tunnel and connected with the longitudinal 100mm permeable pipe length of 6-30m with matching straight-through and tee joints, which can be conveniently connected.

◎ Lining steel wire: high strength spring hard steel wire, with phosphoric acid anti-rust treatment, coated with P.V.C (resistance heating method);

◎ Filter layer: non-woven filter layer;

◎ Permeable and covering materials: high-strength nylon yarn is used for warp and special fiber is used for weft;

◎ Then the material: special strong P.V.C adhesive.

 

Soft permeable pipe performance indicators: JC937-2004

Project Unit Technical indicators
Specifications  mm FH50 FH80 FH 100 FH 150 FH 200 FH 250 FH300
Longitudinal tensile strength Kn/ 5cm ≥ 1.0
Longitudinal elongation  % 12
transverse tensile strength Kn/ 5cm ≥ 0.8
Transverse elongation  % 12
bursting strength KN ≥ 1.1
Flow Cm/s.10-3 0.18 0.44 1.672 3.032 8.839 19.25 50.2
Water permeability coefficient K20 ≥ Cm/s 0.1
Equivalent aperture O95  mm 0.06-0.25

Compressive strength Kpa

1% N 400 720 1600 3120 4000 4800 5600
2% N 720 1600 3120 4000 4800 5600 6400
3% N 1480 3120 4800 6400 6800 7200 7600
4% N 2640 4800 6000 7200 8400 8800 9600
5% N 4400 6000 7200 8000 9200 10400 12000
steel wire Diameter Mm ≥ 1.6 2.0 2.6 3.5 4.5 5.0 5.5
Spacing Circle/m ≥ 55 40 34 25 19 19 17
Thickness of protective layer Mm ≥ 0.30 0.34 0.36 0.38 0.42 0.60 0.60

Inquiry

Action
Submit