Products

Staple needle-punched geotextile

Staple fiber needle-punched geotextile is made of polyester or polypropylene staple fiber through carding or wire needle consolidation.

Filament geotextile

Filament geotextile is directly made by spinning and needling consolidation with polyester method. The product specification is arbitrarily selected from 80-800g/m². It is a geosynthetic material applied in geotechnical engineering and civil engineering. It is made by polyester filament forming and consolidation method, and its fibers are arranged into a three-dimensional structure. In addition to good mechanical properties, but also has good vertical and horizontal drainage performance and good elongation performance and high resistance to biological, acid and alkali, aging and other chemical stability. At the same time, it also has a wide range of pore size, tortuous pore distribution, excellent permeability and filtration performance.

Filament woven geotextile

Filament woven geotextiles are geotextiles woven from two or more sets of yarns, strips or other components, usually perpendicular to each other. The material is mainly polyester (PET) and polypropylene (PP) two, characterized by light weight, high breaking strength, elongation at break, good overall performance, good aging resistance.

Filament singeing geotextile

Filament singed geotextile has good waterproof, heat preservation, reinforcement, anti-corrosion and other functions, and also has a good effect on preventing crack development and prolonging the service life of asphalt pavement.

Woven geotextile

Woven geotextile is made of polypropylene and polypropylene flat yarn, and is composed of at least two parallel yarns (or flat yarns). One group is called warp along the longitudinal direction of the loom (the direction of fabric travel), and the other group is called weft. With different weaving equipment and weaving process will warp and weft woven together into a cloth, according to the different use of the scope of weaving into different thickness and density, general woven geotextile thin vertical and horizontal have quite strong tensile strength (longitude is greater than latitude), has a very good stability.

Warp-knitted needle-punched composite geotextile

The warp-knitted needle-punched composite geotextile is a new type of geotextile material, which is made of glass fiber (or synthetic fiber) as reinforcing material and compounded with staple fiber needle-punched non-woven fabric. The warp-knitted composite geotextile is different from the general woven fabric, and its biggest feature is that the intersection of warp and weft is not bent, and each is in a straight state. After the two are bound firmly with a binding line, the external force can be fully and uniformly borne simultaneously and the stress can be dispersed. When the geotextile is torn by external force, the yarn will gather along the initial crack and increase the tear strength.

High strength warp knitted reinforced geotextile

High-strength warp-knitted reinforced tusset is a high-strength fiber tow that is wound and bound by warp knitting technology, so that the fiber tow is consolidated with the non-woven fabric, and the fiber bundle is tied and arranged straight, which not only maintains the back filtration of the non-woven fabric, but also has the strength of the woven fabric.

Warp-knitted reinforced coated geotextile

Warp-knitted reinforced coated geotextile, also known as glass fiber polyester reinforced anti-crack cloth and warp-knitted composite polyester anti-crack cloth, is a brand-new glass fiber composite anti-crack material developed and produced by Yizheng Kangshun Geotextile Co., Ltd. It is a kind of geosynthetic material processed by special technology, which can be widely used in asphalt pavement construction and reconstruction to prevent reflection cracks, water damage and enhance pavement bearing capacity.